How to Apply Pride Stickers to Dice Boxes and Trays
By Foam Brain Games - Plastic and Metal RPG Dice, Enamel Pins, and | Published: 2026-11-04
Category: 사용 방법 가이드
A step-by-step guide to placing a rainbow pride sticker on dice boxes and trays so it stays flat, centered, and scratch-free through game night.
Quick answer
Apply your pride sticker to a clean, dry, flat area of the dice box lid or tray floor, press from the center outward to push out air, and avoid curved or textured spots that let edges lift.
Why placement matters more on dice gear
Dice boxes and trays get handled, stacked, and slid across tables, so a sticker on a high-friction corner or a curved rim will peel faster than one placed on a flat panel. Gloss vinyl stickers resist scratching and tearing, but they still need a smooth surface to bond evenly.
If your box has a felt-lined tray or a soft interior, keep stickers on the outside lid or a hard insert rather than the lining. Felt fibers don’t give adhesive a solid grip, and pulling a sticker off felt can leave fuzz behind.
When a rainbow pride sticker is the right choice
A rainbow pride sticker works best when you want a bold, readable statement on a lid or tray floor without covering the whole surface. Smaller stickers suit tray corners and box latches; larger ones need a flat panel at least as wide as the sticker plus a small border.
Skip stickers on surfaces that flex, like soft dice bags or thin plastic fold-over trays, because repeated bending will crack the vinyl edge over time.
Step-by-step sticker application
- Clean and dry the surface: Wipe the lid or tray area with a lint-free cloth and let it dry completely. Avoid alcohol or harsh cleaners on painted or felt surfaces; a slightly damp cloth followed by a dry one is enough. Any dust or oil left behind will show as a bubble or weak spot, so check the surface in raking light before moving on.
- Test the placement without peeling: Set the sticker face-up on the box or tray and slide it around to find the best spot. Aim for a flat panel with at least 1/8 inch of margin from edges, hinges, or latches. If the sticker overhangs a curve or seam, reposition it now rather than after the adhesive touches down.
- Peel and align from one edge: Peel back only the top inch of backing, press that edge down in line with your planned position, then slowly peel the rest of the backing away while smoothing the sticker with your thumb. Starting from one edge lets you correct alignment before the full adhesive contacts the surface.
- Press out air from the center: Use your thumb or a soft cloth to press from the center toward the edges in short strokes. Work out any bubbles as you go rather than trapping them under the vinyl. Small bubbles often disappear with firm pressure; large ones may need a tiny pinprick and another press.
- Burnish the edges: Run your thumbnail or a cloth-wrapped card around the sticker perimeter with firm pressure. This seals the edge against lifting when the box slides in and out of a bag. Edges that are not burnished are the first place a sticker will start to peel.
Product facts
- That's How I Roll Sticker - Rainbow Pride: 3-inch gloss vinyl sticker that is weather resistant and won’t scratch or tear. The 3-inch size fits most dice box lids and tray corners, and the durable vinyl handles regular handling without needing a protective cover.
That's How I Roll Sticker - Rainbow Pride
